To be used for positioning and applying pressure, e.g. during painting and sandblasting.
This article 2B150.1041 - Lateral Plunger smooth, without seal, with female thread - INCH / Standard spring load (d1: 5/8 in, d2: 1/4-20, Spring load F max.1: ~ 34 lb) is one variant of the article group Lateral Plungers smooth, without seal, with female thread - INCH (EH 2B150.)
Body
Threaded washer
Spring
Individual set screws can be screwed in the plate with threaded hole.
Version standard spring load = spring from steel, blackened
Formula for calculating the center distance for the mounting hole:
l0 = z/2 + w + x,
l0 = center distance,
y = workpiece height,
w = workpiece length,
x = stroke,
z = stop diameter
Calculation dimension x for workpieces:
x = d2/2 - s
Installation by pressing in.
Compliant according to Directive 2011/65/EU and Directive 2015/863.
No SVHC substances with more than 0.1% w/w contained - SVHC list [REACH] as of 23.01.2024.
No Proposition 65 substances included.
https://www.P65Warnings.ca.gov/
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.