Nuts for T-Slots DIN 508
EH 23010.
These nuts for T-slots (slot nuts) are manufactured according to DIN 508. The range is extended by other dimensions that are not included in DIN.
Your selection resulted in 5 hits
More details
- Heat-treated steel
- System: V70
- T-slot size: 14 mm
- d: M6
- a: 13.6 mm
- e: 22 mm
- h: 16 mm
- k: 8 mm
- for T-slots DIN 650: 14 mm
- Testing force to DIN 508 F min.: 16 kN
- Weight: 43 g
- Heat-treated steel
- System: V70
- T-slot size: 14 mm
- d: M8
- a: 13.6 mm
- e: 22 mm
- h: 16 mm
- k: 8 mm
- for T-slots DIN 650: 14 mm
- Testing force to DIN 508 F min.: 29 kN
- Weight: 41 g
- Heat-treated steel
- System: V70
- T-slot size: 14 mm
- d: M10
- a: 13.6 mm
- e: 22 mm
- h: 16 mm
- k: 8 mm
- for T-slots DIN 650: 14 mm
- Testing force to DIN 508 F min.: 46 kN
- Weight: 38 g
- Heat-treated steel
- System: V70
- T-slot size: 14 mm
- d: M12
- a: 13.6 mm
- e: 22 mm
- h: 16 mm
- k: 8 mm
- for T-slots DIN 650: 14 mm
- Testing force to DIN 508 F min.: 67 kN
- Weight: 34 g
- Heat-treated steel
- System: L16
- T-slot size: 18 mm
- d: M16
- a: 17.6 mm
- e: 28 mm
- h: 20 mm
- k: 10 mm
- for T-slots DIN 650: 18 mm
- Testing force to DIN 508 F min.: 128 kN
- Weight: 68 g
Material
- Heat-treated steel, tempered, quality 10, blackened
Notes
Special types on request.
Assembly
The entire loading capacity of the T-nut can only be applied if the screwing is guaranteed to be made over the total thread length of the T-nut.
Further products
RoHS compliant
Compliant according to Directive 2011/65/EU and Directive 2015/863.
Does not contain SVHC substances
No SVHC substances with more than 0.1% w/w contained - SVHC list [REACH] as of 23.01.2024.
Does not contain Proposition 65 substances
No Proposition 65 substances included.
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.